JagDroid-CASSETTE is an upgrade to the factory CASSETTE player which adds Bluetooth audio streaming functionality
Please note that JagDroid-Cassette does not support handsfree telephone calling, it supports only audio streaming.
Operating instructions – model years 1997-2000:
- PAIRING A BLUETOOTH DEVICE
- Ensure you have an cassette in the player
- Press TAPE to enable Cassette/Bluetooth mode – if cassette audio is heard, press A.MEM and you will hear silence which indicates Bluetooth mode is active
- Press PTY to enter Bluetooth discovery mode
- On your Phone, go to the Bluetooth menu and search for devices – you will see JagDroid-Cassette appear, select this device to connect
- PLAYING AUDIO VIA BLUETOOTH
- On your Phone check that the volume is set to around two thirds of maximum, then play your music and it will be received by the JagDroid-Cassette unit and played through the Jaguar speakers
- Press << or >> on the Cassette Player front panel to skip tracks forward or backwards on your phone
- Press SEEK on the steering wheel controls to skip tracks forward on your phone
- Press A.MEM to switch between Cassette audio and Bluetooth audio modes
- RECONNECTING TO BLUETOOTH
- The JagDroid-Cassette unit will automatically connect to the last connected Bluetooth device when the ignition is switched on. You can disable this if desired by entering Configuration Mode detailed below
- If the Bluetooth device is disconnected for any reason, go to the Bluetooth settings on your Phone and choose JagDroid-Cassette from your list of known devices to re-connect. If the connection is not successful press PTY to enter discovery mode and try again
- If you ‘Forget’ the Jagdroid-Cassette bluetooth device from your phone, simply press PTY while the JagDroid-Cassette player is in bluetooth mode (i.e. cassette in the player and playing, but no sound heard from the system). This will re-enter discover mode and your phone should be able to re-pair
- Please note that when the cassette reaches the end it will auto-reverse, and the Bluetooth audio will be muted for a short moment – this is normal
- If you still have issues please send a direct message through the Facebook page for assistance! http://www.facebook.com/jagdroid.org
- Hold MODE for approx 5 seconds – Enter configuration options mode (you will hear 5 clicks)
- Press << – Enable/disable auto-stop via bluetooth. When changing from TAPE (bluetooth) mode to AM/FM or CDC, automatically send a STOP command to the currently paired bluetooth audio device (1 click = disabled, 2 clicks = enabled).
- Press >> – Enable/disable auto-play via bluetooth. When changing from AM/FM, CDC or Radio Off to TAPE (bluetooth) mode, automatically send a PLAY command to the currently paired bluetooth audio device (1 click = disabled, 2 clicks = enabled).
- Press PTY – Enable/disable auto-reconnect to last connected bluetooth device on power-up. (1 click = disabled, 2 clicks = enabled).